Quantcast Ballistic-Resistant Materials Data

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 


MIL-HDBK-1013/10
requirements are determined, the design engineer should request a cost
estimate from the manufacturer for a prefabricated structure meeting the
requirements desired.  Having received estimates for the prefabricated
structure and the site-built structure, a cost analysis and a determination
can be made as to which is the most economical.  Each manufacturer offers a
number of standard sizes or will custom build to specifications.  A partial
list of manufacturers can be found in Appendix A.
4.4.4
Ballistic-Resistant Materials Data.  For information regarding
state-of-the-art developments in arms, ammunition and ballistic-resistant
materials, including glazing materials and lightweight armor which are not
discussed in this handbook, refer to MIL-HDBK-1013/1 or:
Naval Civil Engineering Laboratory
Security Engineering Division (Code L56)
560 Laboratory Drive
Port Hueneme, CA 93043-4328
Commercial: (805) 982-9640
DSN: 551-9640
55





 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +