Quantcast Data Preparation for Selection Analysis Procedure

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 


MIL-HDBK-1013/12
C.12.1
Required Information.  The following information is
required for a Safevue selection analysis:
a) Worksheets (see Appendix B):
1)  Safevue Analysis (SA)
2)  Cross-Section Selection (CSS)
C.13
Data Preparation for Selection Analysis Procedure.
This procedure helps to prepare data worksheets for selecting a
glazing system subjected to blast loading.  It provides a set of
structures that step an analyst through glazing, explosives, and
algorithm data preparation.  A process chart and description of
the procedure are shown in Figure C-15.
C.13.1
Required Information.  The following information is
required for data preparation for an evaluation analysis:
a) Project identification
a) Asset identification.  This information is
determined using Figure D-3 and is recorded on the
Glazing System Design Criteria Summary worksheet.
b) Worksheets (see Appendix B):
1)  Safevue Data Entry (SDE)
2)  Safevue Analysis (SA)
132





 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +