Quantcast Glazing Data Preparation for Selection Analysis Procedure

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 


MIL-HDBK-1013/12
<1> Glazing Data Preparation for
Selection Analysis. Prepare
Start
glazing data for entry using Figure
C-16. Proceed to <2>.
<2> Explosives Data Preparation.
Prepare explosives data for entry
<1> Glazing
using Figure C-4. Proceed to <3>.
<3> Algorithm Data Preparation.
Data
Preparation for
Prepare algorithm data for entry
using Figure C-5. Return to Figure
Selection
C-13.
Analysis
<2> Explosives
Data
Preparation
<3> Algorithm
Data
Preparation
Stop
Figure C-15
Process Chart and Description:  Data Preparation for Selection Analysis
Procedure
C.14
Glazing Data Preparation for Selection Analysis
Procedure.  This procedure helps to prepare data worksheets for
selecting a glazing system subjected to blast loading.  It
provides a set of structures that step an analyst through glazing
data preparation.  A process chart and description of the
procedure are shown in Figure C-16 and Figure C-17, respectively.
C.14.1
Required Information.  The following information is
required for data preparation for an evaluation analysis:
a) Glazing height, gasket center line to gasket center
line
b) Glazing width, gasket center line to gasket center
line
c) Number of stacked plates in cross-section
d) Worksheets (see Appendix B):
1)  Safevue Data Entry (SDE)
135





 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +