Quantcast Installation Procedure - 1013_80064

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
Back
Up

 


j)
Turn the dial to the LEFT, stopping when the third number is
aligned with the CHANGING index the second time.  Stop and hold the dial in
this position.
k) Turn the change key in the opposite direction indicated on the
lock and remove the change key.
1) Work the new combination at least three times with the door or
container open to verify the combination is properly set and the lock is
operating smoothly.  If the new combination fails to operate, call for a
qualified locksmith.
To install a Mosler MRK 302-402 Combination
3.5.2.4
Installation Procedure.
Lock, proceed as follows:
a) Using template (provided with lock), position lock in desired
location.
b) Using template, drill and tap four holes in the mounting plate
for the lock-attaching screws (1/4-20).  Drill hole in mounting plate for the
spindle shaft (0.625-inch (16-MM) diameter).
INSERT FIGURE
Figure 35
Figure 34
Mosler MRK 302-402 Backplate
Change key for the Mosler
with Change Key in Inserted
Model MRK 302-402
Position
54





 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.