Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
Back
Up

 


INSERT FIGURE
Figure 38
Mosler MR 302, Wheels
f) While aligning hole through door, fasten dial ring to door using
screws.
Insert dial into dial ring and hold snug.
g)
h) Carefully thread the dial spindle onto the drive cam until snug.
DO NOT FORCE DIAL.
i)  Measure the excess spindle length, unscrew, remove, and
carefully cut off excess leaving 1/16 inch (2 mm) above drive cam.  Remove
burrs.
j) Rethread the dial spindle onto the drive cam until snug and back
off until the keyways in the spindle and drive cam line up.
60








Western Governors University
 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business