01572 WASTE MANAGEMENT
01580 PROJECT IDENTIFICATION (includes plates)
01781 OPERATION AND MAINTENANCE DATA
There are notes in each guide specification to help in editing each section. For additional help contact the
Specification Branch, Code 04A6.
5.10.3 Some Division One sections have additional points of contact for help in editing. The following are
commonly needed on a project-by-project basis:
01450 QUALITY CONTROL - 05 INTERFACE: When editing Section 01450, "QUALITY
CONTROL", seek advice from EFA CHESAPEAKE, Code 05, the Construction Division,
regarding the number and qualifications of the QC Staff. Be sure to include the forms required by
this section in the specification.
01525 SAFETY REQUIREMENTS- O5 INTERFACE: When editing Section 01525, "Safety
Requirements", seek advice from Code 05K, the Construction Division regarding the need for
special project safety requirements.
01421 NETWORK ANALYSIS SCHEDULES - 05 INTERFACE: When editing Section 01321,
"Network Analysis schedules", confer with Code 05 regarding the appropriate number of nodes
and activities for the NAS.
01575 TEMPORARY ENVIRONMENTAL CONTROLS / INTERFACE WITH STORM
WATER MANAGEMENT AND E/S: When editing Section 01575, Temporary Environmental
Controls consult with Code 0425 regarding Stormwater Management and Erosion and Sediment
Control. See also paragraph 3.21 of this guide for editing instructions.
Wordspec is an experimental program which converts SPECSINTACT files to Word for Windows and vice
versa, allowing section editing to be done in Word. This program may be of help to SPECSINTACT beginners.
This program is found on the CCB disk.
5.12 Specification Changes
Corrections to specifications and drawings, once the project has been released for advertising, are made using
Amendments and Change Orders. Instructions for preparing amendments are available from Code 04A6 through
5.13 Air Force Projects
There are certain requirements that are unique to Air Force projects. These are generally noted within the guide
specifications with instructions. In some cases the A/E will be given information to prepare a separate
specification section using the SPECSINTACT templates.