Quantcast Architectural -Cont. - aeg_fe0277

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 


REVIEWERS
INITIALS AT:
ARCHITECTURAL (Cont' d)
100%
35%
Conductive floors shown with necessary
54.
detailing . . . . . . . . . . . . . . . . . . . .
Rough surfaces provided at entrys,
55.
landings, and exterior steps............
Janitors service sink considered.. . . . . . . .
56.
57.
Lavatories, urinal stalls, water closets
typically spaced at, 30", 30", 32"
respectively . . . . . . . . . . . . . . . . .
Package shelf, toilet paper holders,
58.
sanitary napkin dispenser/disposer,
coat hook, ash tray provided in water
closet stall . . . . . . . . . . . . . . . . . . . . . . . . . . .
59. Shelfs, mirrors, electric razor outlets,
coat hooks, toweling or warm air hand driers,
paper towel dispensers provided.........
60.
Stairway treads and risers: 7 l/2"
maximum and 10" minimum respectively
and are non slip . . . . . . . . . . . . . . . . . . . . . . . .
61.
Handrails are 30-34" above tread nosings,
parallel rails are not more than 88'
apart and ends are designed to prevent
catching coat sleeves...................
Minimum 6'-6" clearance between tread
62.
nosing and staircase overhang...........
Electrical service entry-location shown.
63.
64.
Roof fascia construction and expansion
joints shown ...........................
65.
Gravel stops construction and expansion
joints shown . . . . . . . . . . . . . . . . . . . . . . . . . . . .
66.
Roof gutters materials, sizes, slopes
and direction of slipes, screens,
expansion joints shown . . . . . . . . . . . . . . . . . .
67.
Downspouts and leaders, w/strainers at
top of leaders including interior leaders.
(1 sq. in. of downspout section per 150
sq. ft. of roof area is typical)........
5





 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.