STAINLESS STEEL COUNTERS
Provide stainless steel countertop where indicated.
2.1 Stainless steel sheets: ASTM A 167 or Fed. Spec. QQ-S-766, Type 201,
202, 301, 302, or 304, with a No. 4 or better finish on all visible surfaces.
Gages specified or shown are U.S. Standard.
2.2 Counters with Integral Sink: Single compartment, 18-gage stainless steel
with drainboard, conforming to MIL-S-19114, Type 1, Class 2, Style C.
Compartment size shall be as indicated. Support counters on tubular legs with
adjustable flanged feet drilled to allow for attachment to the floor.
2.2.1 Plumbing fittings, piping, and connections are specified under
Section 15401: PLUMBING.
2.3.1 General: In joining pieces of similar metal, fastening devices and
metal used for welding shall be of the same material as the metal being
joined. When a corrosion-resisting material is joined to a dissimilar metal,
fastening devices and metal used for welding shall be corrosion-resisting