Quantcast Drawing Numbers

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 


P-141, Change 4
November 1998
"By the Plumbing Con-
CORRECT:
"Provide __________."
tractor."
EXPLANATION:
"By the Plumber."
See Construction
"By
the
Elevator
Contract Clauses for definitions. "Install"
Contractor."
is defined to mean that others will furnish
CORRECT:
Should not be used. No
the item and the Contractor is only
statement is necessary.
The
responsible
for
installation
and/or
Government recognizes only the
connection. "Furnish" is defined to mean
prime contractor; the assignment of
that the Contractor furnishes the item and
work to subcontractors is the prime
others are responsible for installation
contractor's  responsibility  and
and/or connection. "Provide" means the
should not be done by the designer.
Contractor is responsible for furnishing,
installing and testing the item.
d.
In the event work which
is shown on the drawings is not
10. DRAWING NUMBERS:  NAVFAC
included in the scope of the
drawing numbers will be assigned and
contract, use the following:
furnished to the A/E by the PM.  Upon
CORRECT:
"Not in contract"' "NIC"
submission of final drawings any unused
or "By the Government," or
drawing numbers will be reclaimed by the PM
"Government
Furnished
and shall not be used by the A/E for any other
Equipment, "GFE".
drawing. Drawing numbers shall be shown on
the 100% submission.
e. INCORRECT: "12 GA zinc-coated steel
flashing."
11. A/E CERTIFICATION AND SIG-
"Copper flashing."
NATURES:
All supervisors, designers,
CORRECT:
"Metal
flashing."
draftsmen, and checkers who are directly
(Metals are referred to only as
concerned with the preparation of NAVFAC
metal and not as a particular
drawings shall have their surnames printed on
material or gauge.  Material and
each drawing. A registered corporate member
gauge  are  covered  in  the
of the A/E firm having the contract with
Specifications.)
SOUTHNAVFACENGCOM or a responsible
person of comparable status shall sign all
f. INCORRECT: "Sheetrock".
drawings in the "submitted by" section of the
CORRECT:
"Gypsum
board"
title block. The title and/or index sheet shall be
(Proprietary  names
are  not
sealed by this same individual. All drawings,
permitted.)
other than the title and/or index sheet, shall be
sealed
by
the
g. INCORRECT: "Proposed."
CORRECT:
"New."
h. INCORRECT: "Install ___________."
"Furnish __________."
DELIVERABLES
11-13





 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +