Custom Search
|
|
|
||
 SECTION 14
STRUCTURAL SUBMITTAL REQUIREMENTS
1. DESIGN GUIDANCE: Follow the most
capacity and time/settlement curves for any
differential/uniform settlement expected.
updated version of published criteria below,
using generally accepted methods of analysis and
2.1.1.2 The description of the structural
design. Document methods and procedures so
system shall include the type of construction,
that calculations clearly support the design.
Where Navy criteria does not apply, use
method of analysis and design, all significant
generally accepted industry practice, stating the
design criteria and loads, and all special features
rationale for its use. Where you are in doubt
to be included on the drawings.
about criteria, methods, procedures or structural
2.1.2 Drawings: No structural drawings are
requirements call Code 072 for assistance. Prior
to beginning work, read SODIV-TG-1002,
required for the schematic submittal.
"Technical Guidance for Structural Engineering",
2.1.3 Calculations:
for specific technical requirements.
No
structural
calculations are required for the schematic
2. SUBMITTAL REQUIREMENTS:
submittal.
2.1
SCHEMATIC SUBMITTAL:
2.1.4 Economic Analysis: An economic
analysis for proposed alternative structural
2.1.1 Basis Of Design: The Basis of Design
systems shall be provided at the schematic
shall justify the foundation and structural systems
submittal and will usually be based on initial
to be used. A brief synopsis shall be included to
capital costs.
Compare alternatives for
identify the logical alternatives for structural
foundations, floor systems, framing systems, and
consideration and to discuss the rationale used to
other major structural components.
determine the best foundation and structural
2.2
35% SUBMITTAL:
systems. Careful attention shall be given to all
factors such as criteria, cost, local conditions,
2.2.1
Basis of Design: See paragraph 2.1.1.
construction schedule and methods, availability
of materials, etc. Discuss physical security
2.2.2 Drawings: The 35% drawings shall
requirements, considerations and features and
how they will be incorporated into the design if
include the following:
applicable. A brief description of the foundation
2.2.2.1 Foundation plan at the same scale as
and structural systems to be used shall be
provided and, as a minimum, shall include the
the architectural plans to show the general sizes,
following:
location and arrangement of all significant
2.1.1.1 The description of the foundation
features of the foundation system. Include the
shall include the subsurface conditions, the
layout of all slabs, footings, piers, grade beams,
method of analysis and design, and the allowable
piles, caissons, pile/caisson caps, trenches, pits,
openings, depressed and thickened slabs, etc.
STRUCTURAL SUBMITTAL REQUIREMENTS
14-1
|
 
|
|
|
||
