Quantcast Figure 78 Cross-Section of Blast Door

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search

(1) Determine reactions around door opening.
(2) Select plate thickness.
(3) Select stiffener size and spacing.
(4) Check adequacy of section for door reactions.
(5) Determine loads on each hinge during the rebound phase.
These loads should be available in the design
calculations of the blast door.
(6) Check stresses on frame due to these hinge loads.
(7) Determine size of anchor rods (or "cadwelds").
Equation 5-13 of NAVFAC P-397.
Door parameters
(1) Determine reactions around door opening.
The ultimate unit resistance of door,
ru = 322.2 psi


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +