PART VI - FACILITY SHIELDING (Designated rf Barrier)
Check personnel barriers for mechanical strength, signs of damage,
and proper grounding (if metallic).
Insure that all shields around high voltage apparatus are properly
Check electromagnetic shields for adequate bonding.
Inspect all electromagnetic shields for holes or openings added since
last inspection. Check to see that such openings are properly
covered with screening or covers.
Inspect power line and signal line filters on wires entering shielded
areas for proper peripheral grounding.
Inspect cable shield pigtails for excessive length.
Inspect rf connectors for tightness, evidence of corrosion, or
Ensure that all grounding conductors penetrating a designated rf
barrier are peripherally bonded to barrier.
Note Deficiencies Below:
Corrective Action Taken