Quantcast Figure 3-16. Bonding of Rack-Mounted Equipments Employing Dagger Pins

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 


MIL-HDBK-419A
s.
Gaskets should be firmly affixed to one of the bond members with screws, conductive cement, or
any other means which does not interfere with their operation. The gaskets may be placed in a milled slot to
prevent lateral movement.
All bonds which are not in readably accessible areas must be protected from corrosion and
t.
mechanical deterioration. Corrosion protection should be provided by insuring galvanic compatibility of metals
and by sealing the bonded joint against moisture (see Section 1.7.3).
Figure 3-15. Typical Method of Bonding Equipment Flanges to Frame or Rack
Figure 3-16. Bonding of Rack-Mounted Equipments Employing Dagger Pins
3-22





 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.