Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 


B  U O Y S. New buoys should have an identification plate showing the
9.2.5.5
following:
Serial number,
q
Manufacturer,
q
Date of manufacture,
q
Diameter,
q
Height,
q
Weight in air,
q
Maximum tension bar load, and
q
NAVFAC drawing number.
q
This plate should be protected during sandblasting and should not be
painted or coated.
Anchors. Identification information for anchors is cast on the crown, on
9.2.5.6
the flukes, or on the side of the shank. Minimum information provided is
as follows:
Manufacturer,
q
Weight, and
q
Serial number.
q
9.2.6 PRE-ISSUE INSPECTION. Items that are issued from inventory should be
inspected prior to shipping or movement from the storage facility. A bill of material
should be reviewed to ascertain the components required and a check of all
material sizes accomplished. To ensure all mooring components fit when shipped to
the field, a physical fit check should be accomplished prior to shipment. The many
configurations and designs of mooring hardware increase the likelihood of a misfit
if a physical fit check is not accomplished.
88








Western Governors University
 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business