Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 


FIGURE 10-11.
Alarm Actuator and Totalizer System
2.7 Repeater.  The repeater is used to extend the distance the remote
equipment can be located from the q eter.  The repeater is located as close as
practical to the meter. The repeater allows reduction of the electrical load
on the meter generator electrical contacts, extending the life of the device.
It also provides a strong signal to allow monitoring equipment at remote
locations to be as much as several miles from the meter.
2.8 Accumulators. When it becomes necessary to place two or more q eters in
parallel to satisfy a system requirement, an accumulator collects and combines
data from these meters and transmits a totalized signal to the remainder of
the system.
10-8








Western Governors University
 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business