TYPE: UNDERWATER CUTTING (Electrode -
Rod can be bent 900 for hard-to-reach cuts or for
cutting around blind corners without restricting the
oxygen flow or decreasing its cutting efficiency.
NSN: 9GD 3439-01-256-3361 (1/8X 14)
MIL SPEC: MILE- 17764
RECOMMENDED AMPERAGE: 450
To cut ferrous or non-ferrous metals, concrete, rock,
even the space shuttle's heat shield!
Readily ignited when submerged, this rod will continue
to burn - even without power - until its oxygen
supply is cut off. This advanced cutting rod works in
conjunction with any cutting torch or welding
machine, but reaches maximum efficiency when used
with an oxy-arc cutting torch.