| Tweet |
Custom Search
|
|
|
||
 PT-153
PT-171
BRUSH ONE COAT OF RED LEAD ON SMOOTH METAL SURFACE
BRUSH PAINT SAFETY STRIPES ON CORRUGATED METAL
SURFACE
NO WORK UNIT DESCRIPTION
====================================================
NO WORK UNIT DESCRIPTION
====================================================
1 APPLY ONE COAT OF RED LEAD ON METAL SURFACE USING
BRUSH
1 PAINT SAFETY STRIPE ON CORRUGATED METAL WITH
2 IN-PROCESS SETUP AND HANDLING TIME
1" WIDE BRUSH
3 ADDITIONAL JOB PREPARATION TIME FOR PAINTING
2 ADDITIONAL JOB PREPARATION FOR PAINTING
PT-153 =
.00894 HRS PER SQ FT
PT-171 =
.21504 HRS PER SQ FT
PT-154
PT-172
BRUSH ONE COAT OF SHELLAC ON PLASTER AND/OR WOOD
BRUSH PAINT SAFETY STRIPES ON SHEET METAL SURFACE
SURFACE (FLAT)
NO WORK UNIT DESCRIPTION
====================================================
NO WORK UNIT DESCRIPTION
====================================================
1 PAINT SAFETY STRIPE ON SMOOTH METAL WITH 1" WIDE
1 APPLY COAT OF SHELLAC ON WOOD OR PLASTER SURFACE
BRUSH
USING BRUSH
2 ADDITIONAL JOB PREPARATION TIME FOR PAINTING
2 IN-PROCESS SETUP AND HANDLING TIME
3 ADDITIONAL JOB PREPARATION TIME FOR PAINTING
PT-172 =
.04254 HRS PER SQ FT
PT-154 =
.00488 HRS PER SQ FT
PT-173
PT-155
BRUSH PAINT SAFETY STRIPES ON WOOD PANEL SURFACE
BRUSH ONE COAT OF ZINC CHROMATE ON SMOOTH METAL
NO WORK UNIT DESCRIPTION
SURFACE
====================================================
1 PAINT SAFETY STRIPE ON WOOD SURFACE WITH 1" BRUSH
NO WORK UNIT DESCRIPTION
2 ADDITIONAL JOB PREPARATION TIME FOR PAINTING
====================================================
1 PRIME COAT METAL WITH ZINC CHROMATE USING 4" BRUSH
PT-173 =
.07004 HRS PER SQ FT
2 IN-PROCESS SETUP AND HANDLING TIME
3 ADDITIONAL JOB PREPARATION TIME FOR PAINTING
PT-155 =
.01174 HRS PER SQ FT
PT-201
GLAZING - INSTALL GLASS PANE (24" X 24") IN NEW
WOOD SASH, INCLUDING CUTTING GLASS TO SIZE
PT-163
NO WORK UNIT DESCRIPTION
====================================================
BRUSH ONE COAT OF PAINT ON TRIM MATERIAL AND OTHER
NARROW SURFACES UP TO 3" WIDE TO INCLUDE WOOD,
1 INSTALL PANE IN NEW WOOD SASH ON JOB SITE WHERE NO
METAL, CONCRETE, PLASTER AND TERRA COTTA MATERIALS
GLASS TO BE REMOVED (PANE 14" X 20" - ONE PERSON
NO WORK UNIT DESCRIPTION
2 CUT AVERAGE SIZE PANE OF WINDOW GLASS
====================================================
1 APPLY COAT OF PAINT ON WOOD TRIM OR "CUT IN" WOOD
.16697 HRS PER PANE
PT-201 =
STRIP UP TO 3" WIDE WITH BRUSH
2 APPLY COAT OF PAINT ON SMOOTH OR FINISHED METAL
STRIP UP TO 3" WIDE OR "CUT IN" WITH BRUSH
3 APPLY COAT OF PAINT ON PLASTER SURFACE UP TO 3"
WIDE OR "CUT IN" WITH BRUSH
4 APPLY COAT OF PAINT ON CORRUGATED METAL STRIP UP
3" WIDE OR "CUT IN" WITH BRUSH
5 APPLY COAT OF PAINT ON CONCRETE SURFACE UP TO 3"
WIDE OR "CUT IN" WITH BRUSH
6 APPLY COAT OF PAINT ON TERRA COTTA SURFACE UP TO
3" WIDE OR "CUT IN" WITH BRUSH
7 IN-PROCESS SET UP MD HANDLING TIME
8 ADDITIONAL JOB PREPARATION TIRE FOR PAINTING
.00586 HRS PER LIN FT
PT-163 =
24
|
 
|
|
|
||
