Figure 12. Sargent & Greenleaf 8500 Series, Dial, Dial Ring, and Spindle

Custom Search

Back

INSERT FIGURE

Figure 12

Sargent & Greenleaf 8500 Series, Dial, Dial Ring, and Spindle

NOTE

If the lock is mounted in the vertical-up or

vertical-down position, the properly aligned

spline should be marked VU/VD on the drive

cam. For right- or left-hand mounting, RH/LH

should be aligned (reference Figure 13).

Tap in

r) Insert the spline key with the lip toward edge of cam.

lightly.

The dial must turn freely with no rubbing or interference.

NOTE

Before attaching cover to lock, check for

proper in and out travel of dial for

operation of accelerator spring.