Custom Search
|
|
|
|||||
|
|||||
 k) Insert the spline key. Drive the spline key in carefully. If
Make
the spline key becomes loose, the lock will not function properly.
certain that the spline key is tight.
The lock
1) Attach the back cover using the cover mounting screws.
is now ready to have the new combination set.
Maintenance Recommendations. Periodic servicing will extend the
4.2.1.5
life of the lock and is essential for maintaining proper security. Each time
the combination is changed, inspect the lock for wear, metal filings, drilled
holes, cracks, or any other visual signs of attempts to defeat the lock by
forced entry techniques. The inspection process should include removal of the
back cover of the lock, and visual examination of each wheel part as well as
the cam and lever assembly to make sure nothing is worn or damaged. If
lubrication is required, use molybdenum-disulfide (powder). NEVER use oil- or
petroleum-based lubricants on combination locks.
Each time the back cover is removed, the combination should be
reset. Remember to check the combination at least three times before locking
the container.
Any maintenance other than changing the combination and inspecting
the lock should be referred to a qualified locksmith.
61
|
 
|
||||
|
|||||
