Custom Search
|
|
|
||
 7)
Ceiling mounted signage.
c) Roof Plan showing all pertinent dimensions, direction and
amount of slopes, parapet walls, internal drains or gutters,
downspouts, scuppers, crickets, skylights, roof penetrations, vents,
exhausts, monitors, hatches, expansion-joints and roof-mounted
equipment.
d) Building Elevations showing elements noted under Schematic
Submission requirements.
e)
Building Sections (2) showing:
1)
Floor, wall, partition, ceiling and roof materials.
2)
Major finishes.
3)
Exterior grade, floor and roof elevations.
4)
Interior wall and ceiling heights.
5) Doors, windows, expansion joints, casework, toilet
partitions, ladders and signage.
6)
Lighting, HVAC registers and returns, and built-in
equipment.
f) Exterior Wall Sections from foundation to roof
membrane/parapet top for each type of exterior wall system.
Show and
label each material. Include "R-Values" for wall and roof
insulation.
g) Typical Interior Partitions Sections showing smoke and fire
ratings (show current UL or FM listings) and acoustical ratings.
h)
Door, Window and Louver Schedules showing:
1) Door types, sizes, materials, frame types and
materials, sidelights, transoms, hardware sets, signage, fire ratings
(show class and hourly rating) and acoustical ratings.
2)
Window types, sizes, framing materials and glazing
type.
3)
Louvers with frame, vane operation, fire rating, etc.
i) Finish and Color Schedules showing floor, base, wainscot,
wall, and ceiling finishes and color information. Show ceiling
heights.
17.4.2.2 Specifications: Provide an outline of each technical
section appropriate to the design. Identify the grade, class or type
of architectural materials in the outline.
17.4.2.3
Submit the following:
a)
Basis of Design:
Expand on the discussion provided for the
17 -
7
|
 
|
|
|
||
