Custom Search
|
|
|
||
 P-141, Change 3
April 1997
and nonmandatory) are those for which
Qualified Products Lists, Military Bulletins, and
construction drawings and specifications
similar documents are available from DAPS
(referred to as standard drawings and standard
Philadelphia. See Paragraph 9 for ordering
specifications) are available.
Mandatory
information. Many of these documents are also
standards are developed for certain specialized
available on the CCB.
structures to insure uniform construction
which will meet the rigid operational
6. NON-GOVERNMENT CRITERIA: It is
requirements established by using Commands
the policy of the Government to use non-
and their use is mandatory without deviation.
Government or industry criteria and standards as
Nonmandatory standards are furnished as
much as possible, where it does not conflict with
recommended guides and present complete
the requirements or interests of the Government
construction information. Modifications may
or result in restrictive bidding and competition.
be made in the manner delineated by MIL-
The American Society for Testing and Materials
HDBK-1006/1, "Policy and Procedures for
(ASTM), American National Standards Institute
Project
Drawing
and
Specification
(ANSI), and others are used extensively in
Preparation".
SOUTHNAVFAC-ENGCOM contracts.
If
required, these documents must be obtained
c. Definitive
Designs
(DDs),
when
directly by the A/E (i.e., from the CCB, from
applicable: Definitive Designs are drawings
appropriate industry association or technical
issued by NAVFAC for buildings and
societies, or from other sources).
structures for which there will be a repetitive
need in future Military Construction Programs.
7. DESIGN KIT: The A/E will be provided a
These designs set forth the best combination of
"DESIGN KIT" which will include the following
functional requirements and engineering
regional information (which is not available from
judgment as determined from the experience of
the
CCB):
the
current
NAVFAC and the cognizant using Commands,
"SOUTHNAVFACENGCOM
Index
of
and the drawings provide floor plan
arrangements, equipment layouts, building
Criteria", a set of the current SOUTHNAV-
elevations, utility requirements, etc., for
FACENGCOM interim Regional Revisions to
guidance in preparing designs. Use of DDs is
the NFGSs, and other applicable regional
guidance. This regional information, as well as
required when available.
While minor
other criteria-related information, is also
modifications may be necessary to meet
specific site requirements or local conditions,
available for browsing or downloading on the
major modifications must be fully supported
Planning and Design Criteria webpage,
and
cleared
through
SOUTHNAV-
accessible from the SOUTHDIV website on the
FACENGCOM.
Internet
(www.navy.mil/homepages/
navfac_southdiv). Paper copies of guide
d.Air
Force
Manuals,
Regulations,
specifications included on the CCB will NOT
Instructions,
Handbooks,
Engineering Technical Letters (ETLs), and
Construction Technical Letters (CTLs) when
applicable.
5. GOVERNMENT
SPECIFICATIONS
AND STANDARDS: Federal and Military
Specifications, Federal and Military Standards,
CRITERIA
8-2
|
 
|
|
|
||
