Custom Search
|
|
|
||
 a. Use NAVOSH Instruction 5100.23C
a. Hazardous components such as fuels,
for Navy projects.
b. Use AFOSH 161 series for Air Force
propellants, lasers, explosives, toxic
substances,
hazardous
construction
projects.
c. Ensure that adequate ventilation is
materials, pressurized systems, and other
energy sources whose uncontrolled release
provided to avoid `sick building'
would adversely affect personnel or
syndrome.
d. Industrial ventilation systems must be
facilities.
reviewed by the Naval Facilities
b. Safety related interface considerations
Engineering Service Center, Port
among the various elements from above
Hueneme, CA.
e. Locate eye wash and/or emergency
hazards between the facilities and
personnel. Examples are incompatible
shower within 50 ft of eye hazardous
chemicals, inadvertent activation of
operations.
controls, failure to activate controls,
3.4 100 PERCENT SUBMITTAL:
personnel exposure to hazardous energy
sources.
Drawings must include all safety features
required by the design criteria. All known
c. Environmental constraints including the
asbestos containing materials that will be
operating environment, noise, exposure to
removed or disturbed must be located on
toxic substances both chemical and process
demolition sheets. Any interference with
by-products,
health
hazards,
fire,
mechanical, electrical or other building
electromagnetic radiation both ionizing and
systems must also be noted. Areas that will
non-ionizing.
require lead paint to be removed must be
identified.
d. Safety related equipment, safeguards,
a. Provide quantities of asbestos and/or
interlocks, system redundancy, fail safe
design, and barriers to protect personnel.
lead to be removed.
b. Indicate access and removal route
within building.
c. Show locations for decon area and lay
personnel injury and/or property damage
due to uncontrolled energy release or
down area.
personnel
exposure
to
hazardous
conditions.
complex removals.
f. Provide
3.5 FINAL SUBMITTAL:
recommendations
for
The final
elimination or control of the hazards
submittal shall incorporate all previous review
identified above.
comments.
3.3 35 PERCENT SUBMITTAL: The
"Basis of Design" must include resolutions
(elimination or control) for each hazard
identified in the hazards analysis.
DELIVERABLES
11-30
|
 
|
|
|
||
