Custom Search
|
|
|
||
 Do not use gasoline,kerosene, or other low flashpoint solvents. A
serious explosion may result.
(2) Clean silencer using approved solvent or detergent and water
solution.
(3) Dry silencer thoroughly.
Ensure all joints are tight to avoid entry of unfiltered air. Dirt
in the air will cause premature wear to the compressor.
(4) Reinstall silencer into compressor system using new gaskets and
seals.
(d) Check all external surfaces for corrosion, peeling, or damaged
paint. Repaint as necessary.
(e) Remove tag from controls.
4-6
|
 
|
|
|
||
