| Tweet |
Custom Search
|
|
|
||
 PROCEDURES:
TYPE: MILD STEEL - ARC AWS/ASTM E-6012
On flat butt joints, hold the rod at a right angle to the
plate. On horizontal fillets, the rod is held 30 to 45
NSN: 9GD 3439-00-947-5383 (3/32X 14)
degrees with horizontal and at a right angle to the
9GD 3439-00-165-4176 (1/8X 14)
longitudinal axis. Weld vertical from top down. Use a
9GD 3439-00-165-4175 (5/32x 14)
whipping motion when welding from bottom to top.
For overhead work, use a slight whipping motion.
POSITIONS: All
CHARACTERISTICS :
POLARITY: AC or DC Straight
Shallow to medium penetration, medium heavy slag,
smooth bead, low spatter loss. Excellent for rusty
RECOMMENDED AMPERAGES:
metal.
3/32 - 40 to 90
1/8 - 80 to 120
Tensile Strength: 67,000-80,000 psig
5/32 -120 to 190
USES:
Primary: Joining of mild steel. Small-diameter rods
for sheet metal, large-diameter rods for fillets and poor
fit-up.
Secondary: A fast electrode for overlaying and
cladding of worn and undercut surfaces prior to
wearfacing.
1-2
|
 
|
|
|
||
