| Tweet |
Custom Search
|
|
|
||
 ASPHALT MIXERS AND PAVERS (Continued)
Scraper Cutters and Sides
Carbon Steel
Primary Electrode: Page 1-26
Alternate Electrodes: Pages 1-25 or 1-22
Welding Procedures: Remove bolt-on cutter blades
from scraper before hard-facing. Overlay leading and
bottom edge using above-mentioned electrodes as
indicated by wear pattern (Figure 2-50). Hard-face
sides with waffle pattern using electrodes on pages
1-25, 1-22, or 1-20.
FIGURE 2-50. Hard-Facing Scraper Cutters and Sides
2-56
|
 
|
|
|
||
