Quantcast Valves and Seats

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search

FIGURE 4-7. Drain Traps (Continued)
5.2 Valves and Seats. Replace badly worn or grooved valves and seats. If
either the valve or the seat is worn, replace both as they are matched parts.
Ensure that the valve and seat are clean before installation. Foreign matter
will interfere with proper seating.
5.3 Levers.  Levers and linkages wear at pivot points. If excessive play in
the linkages is found, they should be replaced. Worn levers affect the bucket
or float travel and result in a loss of capacity. Replace corroded or worn
5.4 Buckets and Floats. Replace corroded or damaged buckets or floats.


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.