Custom Search
|
|
|
||
 MIL-HDBK-1013/12
the Glazing System Design Criteria Summary
worksheet.
c) Worksheets (see Appendix B):
1) Cross-Section Evaluation (CSE)
2) Frame Evaluation (FE)
3) Anchorage Evaluation (AE)
4) Wall Evaluation (WE)
6.5
Blast Resistant Glazing Selection Procedure. This
procedure helps to select a glazing system based on performance
against bomb attacks. It provides a set of structures that step
an analyst through analyses for the cross-section, frame, and
wall. A process chart is shown in Figure 24 and a description of
the procedure is presented in Figure 25.
6.5.1
Required Information. The following information is
required for a bombs attack analysis for an selection
application:
a) Bomb Tactic Design Basis Threat (low, medium, high,
or very high). This information is determined using
Appendix D and is recorded on the Glazing System
Design Criteria Summary worksheet.
b) Level of Protection (low or high). This information
is determined using Figure D-20 and is recorded on
the Glazing System Design Criteria Summary
worksheet.
c) Worksheets (see Appendix B):
1) Cross-Section Selection (CSS)
2) Frame Selection (FS)
3) Anchorage Selection (AS)
4) Wall Selection (WS)
62
|
 
|
|
|
||
