Custom Search
|
|
|
||
 MIL-HDBK-1013/12
<1> Data Preparation for Evaluation
Analysis. Prepare worksheets for
Start
Safevue data entry using Figure C-
2. Proceed to <2>.
<2> Safevue Start Up. Begin executing
the Safevue computer program
<1> Data
using Figure C-6. Proceed to <3>.
<3> Safevue Data Entry. Enter data
Preparation for
into Safevue program using Figure
Evaluation
C-7. Proceed to <4>.
Analysis
<4> View Analysis Results. The
screen displays dynamic response
of cross-section and denotes failure
<2> Safevue
if it occurs. Proceed to <5>.
Start Up
<5> Did Cross-Section Fail? If
Safevue reports that the cross-
section failed, proceed to <6>. If no
failure is indicated, proceed to <7>.
<6> Note Failure on Worksheet. In
<3> Data Entry
the appropriate column for the
specific tactic (vehicle bomb or
exterior) and applicable row for the
cross-section, enter the word
<4> View
"failed" on the Cross-Section
Evaluation worksheet (see
Analysis Results
Appendix B for all worksheets).
Check the "No" box in column (g) of
the applicable row for the cross-
section. Use Figure C-13 to select
<5> Did
Yes
a cross-section that will survive an
Cross-Section
attack. Press the `C' and "Enter"
Fail?
keys to display the Safevue Control
Menu. Return to Figure 22.
No
<7> Note Pass on Worksheet. In the
appropriate column for the specific
<7> Note Pass on
<6> Note Failure
tactic (vehicle bomb or exterior) and
Worksheet
on Worksheet
applicable row for the cross-section,
enter the word "passed" on the
Cross-Section Evaluation
worksheet. Press the `C' and
"Enter" keys to display the Safevue
Stop
Control Menu. Return to Figure 22.
Figure C-1
Process Chart and Description: Safevue Evaluation Analysis Procedure
118
|
 
|
|
|
||
