Custom Search
|
|
|
||
 4/17/93
LANTNAVFACENGCOM A&E GUIDE
SECTION 5.
DRAWINGS/SKETCHES
5.1
ARRANGEMENT AND PRESENTATION OF DRAWINGS
Drawings should be arranged in the following order:
Title Sheet and Index (can be included with plot and vicinity plan sheet
and should not be used on projects requiring ten or less sheets)
Vicinity Map/Location Plan
Civil Demolition, Layout, Grading and Storm Drainage, Water and
Sanitary
Boring Logs
Landscaping
Architectural
Structural
Fire Protection (if included as separate sheets)
Plumbing
Mechanical (heating, ventilation, exterior steam and gas distribution)
Solar (if included)
Electrical (including electrical site plan)
Drawings should be consistent in presentation and format. If our discipline
shows written notes and material directly on phases, sections and details, then other
disciplines shall conform to that presentation format, and not use numbers to refer to a
numerical legend elsewhere on the drawing.
5.2
SIZES OF DRAWINGS/SKETCHES
LANTNAVFACENGCOM uses the following size drawings:
Letter-Size
8-1/2" x 11": Use for letter-size sketches and PEDs. Include
1/2" border on all four sides (3/4" border is required at
bound edge).
"D" Size
24" x 36": Use "D" size in all cases unless specifically
directed otherwise by the PM. Use for PEP sketches and
reduce to 8 1/2" x 11" for PEP document.
"F" Size
28" x 40": No longer used unless specifically authorized by
the PM.
Figure 5.2.1 depicts drawing and title block requirements.
5-1
|
 
|
|
|
||
