Custom Search
|
|
|
||
 1.1 APPLICABLE PUBLICATIONS: T h e publications listed below form
a part of this specification to the extent referenced.
p u b l i c a t i o n s are referred to in the text by the basic designation
only.
1 . 1 . 1 American Society for Testing and Materials (ASTM)
Publication:
Aluminum-alloy Extruded Bars, Rods, Wire, Shapes,
B221-76a
and Tubes
1.2 SUBMITTALS:
1 . 2 . 1 Manufacturer's Certificates of Conformance or Compliance:
S u b m i t certificates of conformance or compliance attesting that the
materials and components meet the requirements specified.
Submit the following samples:
1 . 2 . 2 Samples:
a.
Minimum 12-inch long piece of track
One carrier unit
b.
One end stop and one pull-out
C.
1.3 DELIVERY AND STORAGE: D e l i v e r cubicle tracks to Site in
unopened containers clearly labeled as to manufacturer's name and
contents. S t o r e in safe, dry, and clean location. Do not open
c o n t a i n e r s until contents are needed for installation, unless
v e r i f i c a t i o n inspection is required.
2 lines
PART 2 - PRODUCTS
2.1 MATERIALS AND COMPONENTS:
|
 
|
|
|
||
