Custom Search
|
|
|
||
 13.3.2
Calculations
Calculations for each design discipline shall contain a cover sheet,
an index sheet, a summary of criteria on the first page and the
project title, location and construction contract number identified
on each sheet. All calculation sheets shall be clearly legible.
Each page, consecutively numbered, shall identify the total number of
pages contained in the calculations, (sheet ___ of ___), the revision
number, and date. Corrections may be legibly made on interim
submissions, but the bid document submission shall contain smooth,
photo-ready calculations and analytical work. Cite criteria from
which the calculations, rationale and formulae are extracted by
publication number, title, edition and page number. The cover sheet
and each sheet of calculations shall also include the names of the
persons originating and checking the calculations. The person
checking the calculations shall be a registered engineer other than
the originator. IN ADDITION, THE SIGNATURE AND SEAL OF THE LICENSED
DESIGNED ENGINEER TAKING RESPONSIBILITY FOR THE WORK SHALL APPEAR ON
THE COVER SHEET OF THE ENGINEERING CALCULATIONS FOR EACH DESIGN
DISCIPLINE AT THE FINAL SUBMISSION. The index sheet shall include a
table of contents showing the subject and page number for each topic
(introduction, design criteria, calculations) and subtopic (eg., in
structural - loads, materials, references, wind analysis, footing
design, wall design, column design, etc.) addressed in the
calculations.
Computer outputs shall be identified similar to the calculations and
may be referenced as an appendix or attachment. Document the program
name, source, and version. All schematic models used for computer
input shall be provided.
13 -
2
|
 
|
|
|
||
