Custom Search
|
|
|
||
 consecutive subscript number in parentheses.
(3) Note: In the "DATE" block, enter the respective date of
the letter revision.
(4) Note: Leave the "APPROVED" block blank; approval will be
entered by the respective PACNAVFACENGCOM Code 04 discipline
Branch Manager.
c.
Note: Revisions, additions or deletions made to the drawings after
signature and advertisement for bid or distribution of reasons other
than for review shall be the only ones recorded by the above method.
Other revisions and corrections need not be recorded.
DOCUMENT 00102 LIST OF DRAWINGS:
PARA 1.2 CONTRACT DRAWINGS: The following drawings, bearing revision
date of
, supersede previously issued drawings
bearing the same number and title:
NAVFAC
REVISION
DWG NO.
LTR
TITLE
5060196
A
SECOND FLOOR PLAN - AREA B
5060199
C
MISCELLANEOUS DETAILS
8.28.7.6 Adding Sketch(es): Note: The use of a statement should be made
about sketch number is not recommended, but when changes to the drawings are
not feasible, 8 1/2 x 11 inches sketches may be issued by amendment. Sketch
sheets are available from PACNAVFACENGCOM, Code 406. Details and other
information shown on sketch sheets shall be coordinated with the drawings.
See Appendix U, Amendments for sketch sheet.
DOCUMENT 00102 LIST OF DRAWINGS:
PARA 1.2 CONTRACT DRAWINGS: Add the following new sketches, dated
---------, to the list of drawings:
SKETCH NO.
TITLE
---------
---------------------
8.28.7.7
Written Changes to Drawing(s):
DOCUMENT 00102 LIST OF DRAWINGS:
PARA 1.2 CONTRACT DRAWINGS: Changes as directed below shall be made to
the respective drawings. Drawings incorporating the directed changes
are not issued with this amendment.
NAVFAC
CHANGE
DWG NO.
NO.
TITLE/DIRECTED CHANGES
506005
PLANS AND DETAILS
(1)
On "2/A-4/A-5 Enlarged Plan": In Room
"301, delete "FDV Cabinet"; in Room "302,
note north wall along column Line "2" as
"6-inch CMU"
8-25
|
 
|
|
|
||
