Custom Search
|
|
|
||
 A529M-85
Specification for Structural Steel with 42 ksi
(290 PAa) Minimum Yield Point (1/2 in (13 mm)
Maximum Thickness
A570M-85
Specification for Steel, Sheet and Strip, Carbon
Hot-Rolled, Structural Quality
A572M-85
Specification for High-Strength Low-Alloy
Columbium-Vanadium Steels of Structural Quality
1.2
American Iron and Steel Institute (AISI)
SG-672-83 Specification for the Design of Cold-Formed Steel
Structural Members and Commentary
1.3
American National Standards Institute (ANSI)
A58.1-82
Minimum Design Loads for Buildings and Other
Structures
B18.22.1-65
Plain Washers
1.4
American Institute of Steel Construction (AISC)
S326-78
Specification for the Design Fabrication and
Erection of Structural Steel for Buildings with
Commentary
Research Council on Structural Connections
Specification for Structural Joints Using ASTM A325 or A490
Bolts
1.5
American Welding Society (AWS)
D1.1-85
Structural Welding Code
1.6
International Conference of Building Officials (ICBO)
Uniform Building Code
2.
GENERAL.
2.1
This section covers the manufacture and erection of pre-engineered
metal structures. The structure manufacturer shall be regularly
engaged in the fabrication of metal structures and shall be a
member of the Metal Building Manufacturer's Association (MBMA).
2.2
The structure shall include the rigid framing, which are spaced at
a maximum of 20 feet on center, roof and wall covering, trim,
closures, and accessories as indicated on the drawings. Minor
alterations in dimensions shown on the drawings will be considered
in order to comply with the manufacturer's standards building
system, provided that all minimum clearances indicated on the
drawings are maintained. Such changes shall be submitted for
review and acceptance prior to fabrication.
2.08-242
|
 
|
|
|
||
