REFERENCES
ADINA, A Finite Element Program for Automatic Dynamic Incremental Nonlinear
Analysis, Report 82448-1, K.J. Bathe, Massachusetts Institute of
Technology, Cambridge, MA 02139, 1975.
The Air Blast from Simultaneously Detonated Explosive Spheres,, BRL No.
1294, B.R. Armendt, R.G. Hippensteel, A.J. Hoffman, and C.N. Kingery,
Ballistic Research Laboratories, Aberdeen Proving Ground, MD 21005, 1960
American National Standards Institute, 1430 Broadway, New York, NY 10018
A58.1-82
Minimum Design Loads for Buildings and Other Structures
B18.22.1-85
Plain Washers
American Society for Testing and Materials, 1916 Race Street, Philadelphia,
PA 19103
A36A-84
Specification for Structural Steel
A307-84
Specification for Carbon Steel Externally Threaded Standard
Fasteners
A325-84
Specification for High-Strength Bolts for Structural Steel
Joints
A446M-83
Specification for Sheet Steel, Zinc-Coated (Galvanized) by
the Hot-Dip Process, Structural (Physical) Quality
A501-84
Specification for Hot-Formed Welded and Seamless Carbon Steel
Structural Tubing
A529M-85
Specification for Structural Steel with 42 ksi (290 MPa)
Minimum Yield Point (1/2 in (13mm) Maximum Thickness
A570M-85
Specification for Steel, Sheet and Strip, Carbon, Hot-Rolled,
Structural Quality
A572M-85
Specification for High-Strength Low-Alloy Columbium-Vanadium
Steels of Structural Quality
ANSYS, Engineering Analysis Systems, User's Manual, G.J. DeSalvo and J.A.
Swanson, Swanson Analysis Systems, Inc., Houston, PA 15342, 1979.
Blast Capacity Evaluation of Glass Windows and Aluminum Window Frames,
Report ARLCD-CR-78016, S. Weissman, et al., U.S. Army Armament Research and
Development Center, Dover, NJ 07801, 1978.
2.08-337