Custom Search
|
|
|
||
 These general installation procedures should then be followed:
Position the crane barge near one of the ring marker buoys (the one
q
within 25 feet of the desired position for the anchor of the first
anchor chain subassembly of Part l). During some installations, it
may be necessary to weld the anchor flukes (see Figure 2-5) to a
predetermined angle.
NOTE
Wind and current conditions will usually
dictate which subassembly is laid first.
Figure 2-5. Welding Anchor Flukestoa Required Angle
24
|
 
|
|
|
||
