Custom Search
|
|
|
||
 APPENDIX E
SECTION 09951
VINYL-COATED FABRIC WALL COVERING
***************************************************************************
NOTE: This guide specification covers the requirements for the provision of
vinyl-mated fabric wall covering.
*****************************************************************************
*****************************************************************************
NOTE: See Note A located at rear of text.
******************************************************************************
PART 1 GENERAL
1.1 SUMMARY
******************************************************************************
NOTE: This article is not used by the Naval Facilities Engineering Command
except in specialized cases. Delete this article when editing for project
specifications.
******************************************************************************
1.2 REFERENCES
The publications listed below form a part of this specification to the extent
referenced. The publications are referred to in the text by the basic
designation only.
FEDERAL SPECIFICATIONS (FS)
(Rev. B) Plastic Sheets an Strips
FS
L-P-1040
(Polyvinyl Fluoride)
(Rev.B) (Amd. 2) Wall Covering,
FS CCC-W-408
Vinyl-Coated
1.3 SUBMITTALS
*****************************************************************************
NOTE: In projects using the Contractor Quality Control System, add the
words, "Submit to the Contracting Officer," to submittals deem& sufficiently
critical or complex or aesthetically significant to merit approval by the
Government.
*****************************************************************************
Submit the following in accordance with Section 01300, "Submittals."
E-1
|
 
|
|
|
||
