Custom Search
|
|
|
||
 (12) Cleaning procedures.
(13) Personnel qualifications requirements for conducting
repairs, inspection and testing.
Personnel Training and Qualifications.
Personnel
2.8.2
involved in the welding and inspection of man-rated hyperbaric
facilities require specific training and qualifications. Commands
using in-house personnel to perform these functions shall ensure
that the individuals concerned meet the following requirements:
Welders: Trained and qualified per one of the following:
a.
(1) MIL-STD-248 (SHIPS) "Welding and Brazing Procedures
and Performance Qualification"
(2) ASME Boiler and Pressure Vessel Code, Section IX,
"Welding, Brazing Qualification"
(3) ANSI/ASME B31.1, "Power Piping", Section V
(4) NAVSHIPS 0900-001-7000, "Fabrication and Inspection
of Brazed Piping Systems"
Trained and qualified per one of the
Inspectors:
b.
following:
(1) ANSI/ASME B31.1, "Power Piping", Section VI
(2) ASME Boiler and Pressure Vessel Code, Section V,
"Nondestructive Examination"
(3) NAVSHIPS 0900-001-7000, "Fabrication and Inspection
of Brazed Piping Systems"
2.9 FACILITY PRE-DIVE PLANNING
Planning Events.
2.9.1
Pre-Dive
Facility pre-dive
planning for man-rated hyperbaric complexes is an important part
of conducting safe operations. Involves ensuring that maintenance
has been completed and properly performed, and that personnel are
properly indoctrinated and briefed prior to conducting manned
The following events should be
hyperbaric or diving operations.
part of pre-dive planning for all man-rated hyperbaric or diving
operations:
a.
Operating and maintenance personnel advised of operating
requirements and responsibilities/assignments clearly
defined per a prepared dive plan (scenario/protocol/dive
bill).
Maintenance requirements scheduled to
be
performed
b.
consistent with the operating schedule.
c.
Maintenance performed, properly inspected and documented.
d.
Operating and emergency procedures reviewed and verified
adequate.
2-10
|
 
|
|
|
||
