| Tweet |
Custom Search
|
|
|
||
 TRACTOR PARTS AND ACCESSORIES
(Continued)
Bulldozer Blades
Carbon Steel
Primary Electrode: Page 1-25
Alternate Electrodes: Pages 1-22, 1-20
Welding Procedures: Position blade in suitable
prehending jig or where necessary, bolt blade to
moldboard. Use skip weld technique. Apply stringer
beads to make deposit 1-1/2 in. wide (Figure 2-13). If
work involves impact, use electrode on page 1-25; in
case of severe abrasion and moderate impact, use
electrode on page 1-26 which provides maximum
service life. NOTE: HIGH CARBON BLADES
MUST BE PREHEATED BEFORE HARD FACING.
FIGURE 2-12. Hard-Facing Bulldozer End Bits
2-23
|
 
|
|
|
||
